1. 2D HIFU machine with 11 lines per shot
2. Standard cartridge: 3.0mm and 4.5mm (body cartridge is optional)
3. Each cartridge has 10000 shots
Standard: machine with 2 cartridges, if need more cartridges, can
buy extra cartridges for body
The transducer information:
1. Transducer DS-4.5mm, 4MHZ frequency used to transmit high- energy focused ultrasound
to the skin,
subcutaneous tissue, the ultrasound to penetrate the skin to a
depth of 4.5mm, direct subcutaneous SMAS layer, forming “heat
targeted to thicker skin, such as cheeks, etc.
2. Transducer DS-3.0mm, 4MHz frequency ,used to release ultrasound energy into the dermis
layer of 3.0mm,
is responsible for activating the skin’s dermal layer of collagen,
effectively enhance the effect of the consolidation of the outline,
but also improve large pores and reduce the appearance of wrinkles.
3. Transducer DS-6.0mm,8.0mm,10mm,13mm and 16mm are responsible for transmitting 4 MHZ high intensity focused
ultrasound subcutaneous fat layer to melt the fat cells.
Then the metabolites of fat cells will be excreted by human body’s
metabolism.It is targeting the body.
Note: DS-6.0mm,8.0mm,10mm,13mm and 16mm transducer is ONLY do for
body fat reduction, skin tightening.
1. It uses the latest advanced technology called HIFU, short for
high intensity focused ultrasound.
2. It has three different working heads for different operational
-3.0mm is for the dermis layer;
-4.5mm is for the SMAS layer.
-6.0mm/8mm/10mm13mm/16mm for body fat layer
3. It's totally non-invasive and safe.
4. The effect will be shown after the operation, while the best
effect will be seen after two months. It can be lasted for 2-3
1. Remove wrinkles on around forehead, eyes, mouth, etc.
2. Lift and tighten both cheeks skin.
3. Improve skin elasticity and shaping contour.
4. Improve jaw line, reducing “marionette lines”
5. Tighten the skin tissue on forehead, lifting the eyebrows lines.
6. Improve skin complexion, making the skin delicate and bright
7. Match with injecting beauty like Hyaluronic acid, collagen, to
resolve more aging problem
8. Remove neck wrinkles, protecting neck aging.
1.Clean the Skin.
2.Take a photo before treatment , and paint on the preoperative
lifting location with make - up pencil .
3.According to the skin thickness to select appropriated transducer
4.Set suitable input intensity ( such as1.0-1.5J ) , focal length
and spacing ( such as 1.5mm)
5.Applying ultrasonic plentiful gel as couplant between transducer
6.face lifting operate on the note of power line,
forming a line thermal condensed node in the specified depth under
when the transmitting button is pressed per time,operating
continued on the powder line until the specified location
transmission is completed.
The treatment parts such as face, chin and both sides of neck.
7.don’t operate on marginal mandibular nerve and supra or bital
8.no recovery period after treatment,daub some moisture product and
make up immediately.
9.only once, the comprehensive effect will gradually appear in two
or three moths,Some people may do this treatments several times.
|Cartridge option:||3.0mm,4.5mm,6mm, 8mm,10mm,13mm,16mm (standard two cartridges)|
|Cartridge lifetime:||10000 shots/pc|